MATSONIC MS6261 User Manual page 13

Figure 3-3. BIOS Features Setup Screen
2. Use one of the arrow keys to move between options and modify the selected
options by using PgUp/PgDn/+/-keys. An explanation of the <F> keys follows:


"Help"gives options available for each item.

 
Changes color.
Resets the previous values. These values are the values

 
with which the user started the current session.


Loads all options with the BIOS default values.


Loads all options with the Setup default values.
MS6261 User's Manual
A short description of screen options (Figure 3-3) follows:
CPU Internal Cache Choose Enabled (default) or Disabled.This option
allows the enabling or disabling of the CPU internal
cache.
External Cache Choose Enabled (default) or Disabled.This option
allows the enabling or disabling of the external cache
memory.
Quick Power On Self
Choose Enabled (default) or Disabled.This option
Test speeds up the Power On Self Test routine.
Boot Sequence Choose "A, C, SCSI"(default), or others.This option
determines which drive to engage first for the
operating system.
Swap Floppy Drive Choose Enabled or Disabled (default).This option
swaps floppy drive assignments when enabled.
Boot Up Floppy Seek Choose Enabled (default) or Disabled. In the POST
mode, BIOS will detect the track numbers of the
Installed floppy disk driver. 40 tracks is for 360K type
driver and 80 is for 720K, 1.2M, and 1.44M.
Boot Up NumLock Choose On (default) or Off. This option activates the
Status NumLock function at boot-up time.
Boot Up System Speed Choose High (default) or Low.
Gate A20 Option Choose Fast or Normal (default). This option allows
the RAM to access the memory above 1MB by using
the fast gate A20 line.
Typematic Rate Setting Choose Enabled or Disabled (default). Enable this
option to adjust the keystroke repeat rate.
MS6261 User's Manual