MATSONIC MS7102C Manual page 17

J P 2
J 1
JP1: Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
JP1 3
Function
Normal Operation
2
Clear CMOS
1
JP2: Keyboard Power On Jumper
This jumper lets you use a typed-in password as a power switch to turn
your system on. If you enable this property, you need to define the
password or the hot keys using the setup utility. See Chapter 3 for more
information.
Function
Disable keyboard power on
Enable keyboard power on
14
Jumper Cap
Short pins 1-2
Short pins 2-3
Jumper Cap
Short pins 1-2
Short pins 2-3
J P 4
J P 1
J P 7
JP2
1 2 3