MATSONIC MS7112C Manual page 30

CIH Buster Protection
Anti-Virus Protection
When "CIH Buster Protection" item is enabled it provided some protection
against viruses which try to destroy BIOS viruses (especially for CIH).
When "Anti-Virus Protection" item is enabled it provides some protection against
viruses which try to write to the boot sector and partition table of your hard disk
drive. This item is Enabled as a default. You might need to disable it so that you
can install an operating system. We recommend that you enable Anti-Virus
Protection as soon as you have installed your disk with an OS.
CPU Internal Cache
All the processors that can be installed in this mainboard use internal (level 1)
cache memory to improve performance. Leave this item at the default value
Enabled for better performance.
External Cache
Most of the processor cartridges that can be installed in this mainboard have
(level 2) external cache memory (the Celeron-266 MHz is an exception). Only
enable this item if your processor cartridge has external cache memory.
CPU L2 Cache ECC Checking
This item can be used to enable ECC (Error Checking Code) for the level-2
cache memory. We recommend that you leave this item at the default value
Enabled.
Processor Number Feature
Some new procesosrs (the Pentium-III) are installed with a unique procesosr
identification number. If you disable this item, the number will be suppressed so
that it cannot be read by other systems on the network.
Quick Power On Self Test
You can enable this item to shorten the power on testing and have your system
start up a little faster.
Boot from LAN First
This items lets you specify that the system will try to load an operating system
from a network server first, before booting from any of the local drives.
Boot Sequence
This item defines where the system will look for an operating system, and the
order of priority. You can boot an operating system from many locations
including a SCSI device, a ZIP drive, a floppy diskette drive, or an LS-120 high-
capacity diskette drive.
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows you to
swap around the assigned drive letters so that drive A becomes drive B, and
drive B becomes drive A.
28
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: A, C, SCSI
Default: Disabled