Table of Contents
Advertisement
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64
MB of memory and you are running the OS/2 operating sys-
tem. Otherwise, leave this item at the default.
HDD S.M.A.R.T Capability (Disabled)
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) system is a diagnostics technology that monitors
and predicts device performance. S.M.A.R.T. software resides
on both the disk drive and the host computer.
Report No FDD For WIN 95 (Yes)
Set this item to the default if you are running a system with no
floppy drive and using Windows 95; this ensures compatibility
with the Windows 95 logo certification.
Small Logo (EPA) Show (Enabled)
Enables or disables the display of the EPA logo during boot.
Advanced Chipset Features Option
These items define critical timing parameters of the main-
board. You should leave the items on this page at their default
values unless you are very familiar with the technical specifi-
cations of your system hardware. If you change the values
incorrectly, you may introduce fatal errors or recurring instabil-
ity into your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Advanced Chipset Features
DRAM Timing Selectable
CAS Latency Time
Active to Precharge Delay
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
DRAM Data Integrity Mode
Memory Frequency For
System BIOS Cacheable
Video RAM Cacheable
Memory Hole At 15M-16M
Delayed Transaction
AGP Aperture Size (MB)
Delay Prior to Thermal
: Move
Enter : Select
F5:Previous Values
[Manual]
[3]
[7]
Menu Level
[3]
[3]
[Non-ECC]
[Auto]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[64]
[16 Min]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
F7:Optimized Defaults
46
Item Help
F1:General Help
Advertisement
Table of Contents
