Table of Contents
Advertisement
Primary/Secondary IDE 1/0 (Disabled)
When these items are enabled, the system will restart the
power-saving timeout counters when any activity is detected
on any of the drives or devices on the primary or secondary
IDE channels.
FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When disabled, any PCI device set as the Master will not
power on the system.
PWRON After PWR-Fail (Off)
This item enables your computer to automatically restart or
return to its last operating status after power returns from a
power failure.
57
Advertisement
Table of Contents
