Table of Contents
Advertisement
Figure 5. Location of the Standby Power Indicator LED CR7J1
Hardware Management and Monitoring
The Hardware Management features enable the board to be compatible with the Wired for
Management (WfM) specification. The board has several hardware management features, including
the following:
•
Remote temperature sensing near the Vreg
•
Power supply monitoring (+5V, +3.3V, 3.3 VSB, +1.5V, and VCCP) to detect levels above
or below acceptable values
•
Fan monitoring though four fan tachometer inputs. Monitoring can be implemented using
LANDesk Client Manager or other third-party software.
•
Chassis intrusion detection
The server board S875WP1-E has an integrated Hardware Management ASIC that is responsible for
hardware monitoring. Together, the Hardware Management ASIC and the LANDesk Client Manager
(LDCM) 6.3 software provide basic server hardware monitoring that alerts a system administrator if
a hardware problem occurs on an Intel Server Board S875WP1-E Based system.
The LDCM software is for use with Windows
operating systems. Other operating systems, such as Red Hat Linux cannot be monitored with
LDCM.
Password Security
The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the server. A supervisor password and a user password can be set for the Setup
menu and for booting the server, with the following restrictions:
•
The supervisor password gives unrestricted access to view and change all Setup options.
If only the supervisor password is set, pressing <Enter> at the password prompt of Setup
gives the user restricted access to Setup.
•
If both the supervisor and user passwords are set, you must enter either the supervisor
password or the user password to access Setup. Setup options are then available for
and changing depending on whether the supervisor or user password was entered.
MAXDATA PLATINUM 220 Server
CR7J1
2000 Server and Windows
®
2000 Advanced Server
®
viewing
23
Advertisement
Table of Contents
