Configuration Jumpers; Configuration Jumper Location - MAXDATA PLATINUM 3200 I M5 User Manual

Configuration Jumpers
Table 6. Configuration Jumpers
Jumper Name
CMOS Clear
(J2H1)
Password Clear
(J4H3)
BIOS Recovery
(J4H1)
26
����
���
������
������
�
����
����
���
�
����
a
Figure 21. Configuration Jumper Location
Pins What happens at system reset...
1-2 BMC Control: These pins should be jumpered for normal operation.
2-3 Force Erase: If these pins are jumpered, the CMOS settings will be
cleared on the next reset. These pins should not be jumpered for
normal operation
OFF Protect: These pins should not be jumpered for normal operation.
ON Erase: If these pins are jumpered, administrator and user passwords
will be cleared on the next reset. These pins should not be jumpered for
normal operation.
Normal Boot: These pins should not be jumpered for normal operation.
OFF
ON Recovery Boot: If these pins are jumpered, the system will attempt to
recover the BIOS by loading the BIOS code into the flash device from
a floppy disk. This jumper is typically used when the BIOS has become
corrupted. These pins should not be jumpered for normal operation.
��������
����
����
���
����
�
���� ����
��������
�����
Server Board Features