Configuration And Bios Select Jumpers; Configuration And Bios Select Jumper Locations; Configuration Jumper [J17]; Bios Select Jumper [J29] - MAXDATA PLATINUM 520 System Manual

Configuration and BIOS Select Jumpers
A
Figure 4. Configuration and BIOS Select Jumper Locations
Table 3. Configuration Jumper [J17]
Jumper Name
CMOS clear
Password Clear
BIOS Recovery
Table 4. BIOS Select Jumper [J29]
Operation
Normal Boot
Force Boot
12 12
CMOS CLEAR
CMOS CLEAR
BMC Control
BMC Control
2
Force Erase
Force Erase
3
4
PASSWORD CLEAR
PASSWORD CLEAR
5
Protect
Protect
6
Erase
Erase
7
8
RECOVERY BOOT
RECOVERY BOOT
9
Normal Boot
Normal Boot
10
Recovery Boot
Recovery Boot
11
B
1-2 Normal Boot
1-2 Normal Boot
(off of either bank)
(off of either bank)
Pins What happens at System Reset
2-3 If these pins are jumpered, the CMOS settings will be cleared on the next
reset.
These pins should be jumpered on 1-2 for normal operation.
If these pins are jumpered, administrator and user passwords will be
6-7
cleared on the next reset.
These pins should be jumpered on 5-6 for normal operation.
10-11 If these pins are jumpered, the system will attempt to recover the BIOS
by loading the BIOS code into the flash device from a floppy disk.This
jumper is typically only used when the BIOS has become corrupted.
These pins should be jumpered on 9-10 for normal operation.
Pins What happens at System Reset
1-2 If these pins are jumpered, the board will boot off of either BIOS (bank.0
or bank 1) depending on which is available first.
If these pins are jumpered, the board will boot off of bank 0 BIOS.
2-3
J29 BIOS SEL
J29 BIOS SEL
2-3 Force Boot
2-3 Force Boot
(off of bank 0 BIOS)
(off of bank 0 BIOS)
2 3 2 3
TP00681
Server Board Features Server Board Features