5 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the safety information in 'Server
Position' at the beginning of this manual.
Tools and Supplies Needed
•
Phillips (cross head) screwdriver (#1 bit and #2 bit)
•
Needle-nosed pliers
•
A ruler
•
Pen or pencil
•
Anti-static wrist strap and conductive foam pad (recommended)
Installing and Removing Memory
The silk screen on the board for the DIMMs displays DIMM 1B, DIMM 1A, DIMM 2B, DIMM 2A,
DIMM 3B, DIMM 3A starting from the edge of the board.
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover and locate the DIMM sockets.
MAXDATA Server PLATINUM 3200 I M5
�������
�������
�������
a
Figure 22. Installing Memory
�������
�������
�������
29