Programming The Track Order - Pioneer XR-A9700DV Operating Instruction

Programming the Track Order

To repeat a section of a disc:
Press - (
RPT A B SHIFT
repeat, then again at the end. Playback immediately jumps back to the start
point and plays the loop round and round.
To resume normal playback, press
Note: You can't loop a section of a DVD disc where the start point falls in
one title and the end point in another.
To repeat a section of a disc once only:
Press - (
RPT A B SHIFT
Press 26 at any time to repeat from the beginning of the section.
DVD / Video CD / CD
This mode lets you program a sequence (a playlist) of up to 24 tracks/chapters to play
from any of the discs loaded in the disc changer. The discs can be any combination of
DVD, Video CD and audio CD, and the order any you choose. Chapters/tracks can
appear more than once in the playlist, or can be left out entirely.
The on-screen display used to program the playlist is shown below:
1
Step Disc
1
9
2
3
8
4
5
7
6
4 ¢
1 – Step number (1-6, 7-12, 13-18, 19-24)
2 – Disc number (1, 2 or 3)
3 – Title number (DVD), or track number (Video CD, CD)
4 – Chapter number (DVD only)
5 – Details of disc in current step (example shows 9 chapters in title 2 of the DVD disc
loaded in disc tray 3)
6 – Current cursor position
7 – Steps yet to be programmed
8 – Current step indicator
9 – Steps already programmed
6 More Disc Functions
+5) once at the start of the section you want to
.
CLEAR
+5) at the start of the section you want to repeat.
2 3 4
Title
Program
Chap
Track
2 6
5
1
3 2 6 Disc DVD
3
3 2 -- Title 2
Total 9 Chapter
Page
Move Play
PLAY PROGRAM
6
5
Exit
35
En