Setting Up Using The Setup Navigator - Pioneer XR-A9700DV Operating Instruction

Setting Up Using the Setup Navigator

Audio1 2 Video Language General
Setup Navigator
Setup Navigator Start
Not Used
Setting up using the Setup Navigator
Move ENTER Select SETUP
Setup Navigator starts here
Audio1 2 Video Language General
Setup Navigator
Language
OSD Language
English
Español
Setup player's OSD language
Move Select
ENTER SETUP
Select a menu language
Audio1 2 Video Language General
Setup Navigator
TV Connection
TV Type
Widescreen (16:9)
Standard (4:3)
Widescreen TV
16:9 aspect ratio
Move ENTER Select SETUP
Select a TV Type
Note
The language choices available in
your country/region may differ
from those shown in the
illustrations throughout this
manual.
The Setup Navigator simplifies setup by asking you some questions about your system
and making the necessary settings for you. Before moving on to playing discs, we
strongly recommend using the Setup Navigator as described here.
1 Switch on this unit and your TV.
Use either the power switch on the front panel, or the remote control.
The Setup Navigator will not work if there is a disc playing. If there is a disc
loaded, press 7 (stop).
2 Press SETUP.
If this is the first time you've used the system, you'll be prompted to enter the
Setup Navigator. (If this screen does not appear, read Using the On-screen
Menus on page 28, then select General > Setup Navigator.)
Exit
In this and the following screens, the yellow text near the bottom of the screen
gives you more information on the highlighted option.
3 Press ENTER to start the Setup Navigator.
4 Select your preferred on-screen display (OSD)
menu language.
Note: The choice available in your country/region may vary from the
illustration, left.
Exit
Use the 5 and
then press
If you press
2 (left cursor) button and make your selection again.
5 Select the TV Type that corresponds to your TV.
See page 19 if you're unsure of the difference between widescreen and
standard TVs.
Exit
4 Getting Started
(cursor up and down) buttons to switch between options,
to select it.
ENTER
on the wrong option by mistake, go back by pressing the
ENTER
Continued.
21
En