Memorizing Your Own Settings; Changing The Sound Display - Pioneer XR-A9700DV Operating Instruction

S.M.JOG
EQUALIZER
ZOOM SURROUND
P.BASS(DEMO)
SET
S.M.JOG
DISPLAY
BASS BLASTER mode
Bass Blaster produces a powerful, pumping bass sound.
Press BASS BLASTER (main unit) to switch on/off as required.

Memorizing your own settings

You can memorize up to three different combinations of Equalizer, Zoom Surround,
and P.Bass settings. Access them from the
Note: if the unit is unplugged from the power supply, settings will remain intact for
several days, after which they are lost.
1 Adjust the EQUALIZER, ZOOM SURROUND
and P.BASS to your liking.
Note: the Bass Blaster setting is not stored as a user preset.
2 Push and hold the SET button for about three
seconds.
USER 1 flashes in the display
3 Select USER 1, 2 or 3 by turning the S.M. JOG.
4 Push the SET button again to store the settings.

Changing the sound display

There are six different sound level displays on the main unit. Use the
( on the remote) and the
DISP
1 Press DISP (DISPLAY on the front panel) until
the main unit's display reads DISP.
2 Use the S.M.JOG dial/JOG buttons to cycle
through the six different display types.
Stop on one you like.
10 Using Sound Modes
mode (see the previous page).
PRESET
. . dial/ buttons to switch between them.
S M JOG JOG
button
DISPLAY
51
En