Rightfax Server Setting - Panasonic DP-8035 Operating Instructions Manual

RightFax Server Setting

This enables or disables the RightFax server.
Note:
Password Transmission is not available if the RightFax Server setting is set to valid.
When the User Authentication function is enabled. See the following sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 9 for Logging in as a user.
The machine will generate the Email Address in the format as below, and then send the Email to the RightFax Server.
Ex: "Ifax=5551212/name=Jane/"<rightfax@pana.com>
Fax Number Station Name
Press the Function key on the Control Panel.
Select "FAX/EMAIL SETTINGS".
Select "04 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Select "01 Fax Parameters".
Email Address of the RightFax Server
Select "132 VIA FAX SERVER".
Enable ("VALID") or disable ("INVALID") the
RightFax server.
When you enable the RightFax server for the
first time, you also need to enter the Email
address of the server.
Enter the Email address of the RightFax server,
and then press "OK".
(Up to 60 characters)
Press the Reset key to return to standby.
23