Administrator Name & Password
The user name and password for the system administrator are established in "Authentication Setting" on page
12 when user authentication is enabled for the first time. Use the following procedure if you subsequently wish
to change the system administrator name or password.
Press the Function key on the Control Panel.
Select "GENERAL SETTINGS".
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Select "57 Administrator Name".
Input the system administrator name (up to 40
characters), and then press the "OK".
The name is NOT case-sensitive.
Input the system administrator password (up
to 40 characters), and then press the "OK".
The password is case-sensitive.
Press the Reset key to return to standby.
25