Authentication Setting - Panasonic DP-8035 Operating Instructions Manual

Authentication Setting

The system administrator can enable/disable the user authentication for each function (copying, faxing,
scanning, and printing).
Press the Function key on the Control Panel.
Select "GENERAL SETTINGS".
Select "09 Key Operator Mode".
12
Enter the Key Operator's Password (8-digit),
and then select "OK" .
Select "55 User Authentication".
Select the function where authentication is
required.
Copy
Fax
Printer
Scanner
Time Zone
Copy Press the "COPY".
Fax Press the "FAX".
Print Press the "PRINTER".
Scan Press the "SCANNER".
Note:
The Sender Selection feature is not enabled if the
fax function is set to require user authentication.
For details, refer to the Operating Instructions (For
Function Parameters, Fax Parameter No. 145).