Panasonic DMR-E100H Operating Instructions Manual page 71

∫ Helpful Hints
Displays
The display is dim.
The recording time display, the
dubbing process display and the
displayed recording time of MP3
are different from the actual time.
The actual remaining capacity is
less than the value on the display
or the screen.
Play
Play fails to start even when [1] is
pressed.
Play starts but then stops
immediately.
"NO READ", "UNSUPPORT",
"NO DISC", or "NO PLAY" appears
on the unit's display.
No response when buttons
pressed.
A title or chapter doesn't play when
it is selected.
Picture distorted during search.
Alternative soundtrack and
subtitles cannot be selected.
Soundtrack/subtitle language is
different from the one selected with
the SETUP menus.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
Remote control
The remote control doesn't work.
Cannot operate the TV.
MPEG4
Can not operate with other
equipment.
≥Go to Display in the SETUP menus and change the display's brightness with "FL
Display".
≥The time on the unit's display and the remaining recording time on the screen may be
indicated less or more than actual value.
≥The time during fast forward and rewind, or the process during dubbing may not be
displayed accurately.
≥When recording still pictures or SD VIDEO (MPEG4), the remaining capacity becomes
less than when recording other materials.
≥In DVD-R, the remaining capacity does not increase even if programmes are erased.
≥When dubbing pictures with less motions in "MPEG2#4", they may be dubbed within
small amount of capacity.
≥Insert the disc correctly with the label facing up.
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video
CD, CD and MP3 disc.
≥The disc is dirty. Clean it.
≥The disc may be badly scratched.
≥You inserted a blank DVD-RAM or DVD-R.
≥If " " appears on the TV, the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [
press [ , TIMER] again to turn the unit on. The unit may not be operating correctly due
to lightning, static electricity, or some other external factor.
≥The Child Lock function is activated.
≥Some titles and chapters on DVD-Video are not played when you have changed the
ratings level.
≥Some distortion is normal.
≥The languages are not recorded on the disc.
≥You may have to use the disc's own menus to select languages.
≥The language is not recorded on the disc.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on.
≥This function depends on software availability. Angles can only be changed during
scenes where different angles are recorded.
≥Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [:/6] and [5/9] on the main unit
simultaneously for 5 or more seconds.
≥The unit is on standby to make a timer recording ("
≥[DVD, TV] is not switched to "DVD".
Switch to "DVD" when operating this unit.
≥The remote control code is wrong.
Change to the correct code.
≥The batteries are depleted. Replace them with new ones.
≥Point the remote control at the remote control sensor on the main unit.
≥Remove obstacles between the remote control and main unit.
≥The Child Lock function is activated.
≥If you repeat inserting of discs or turning this unit on and off 50 times or more, the
recording or editing of DVD-R may be disabled.
≥The remote control code is wrong. Change to the correct code. Some TVs cannot be
operated even if you change the code.
≥[DVD, TV] is not switched to "TV". Switch to "TV" when operating the TV.
≥If the card dubbed by this unit is played back by other equipment, it may not be played back
depending on the equipment.
71
, TIMER] to switch the unit to standby, then
" on the unit's display is on).
Page
61
–
–
–
–
–
Page
19
9
66
66
–
–
–
54
58
–
–
–
59
–
46
–
–
Page
30, 31
6
62
6
6
–
54
–
8
8