Table of Contents
Advertisement
9.2 Playback of external devices sound signals
You can playback the sound signals of external devices, for example a portable
CD/MP3 player, via the DVD player's speaker.
For this you connect the right and left audio outputs of the external device with
AUDIO IN
a 3.5 mm jack plug to the
As soon as you have inserted the jack plug into the
player to playback the sound signals from the external device.
AUDIO IN
• Insert the jack plug into the
• To play the sound of the DVD player pull the jack plug from the
Note:
As soon as you have inserted the jack plug into the
LCD display switches off automatically.
9.3 Using headphones
You can connect headphones with a 3.5 mm stereo jack plug to the DVD
player. The headphone connection
DVD player.
When you have connected the headphones, the loudspeakers are disconnected
and you will only hear sound via the headphones.
• Before you connect headphones turn the volume down to the lowest level.
• Insert the jack plug of the headphones into the headphone connection.
Important!
Listening to music with headphones for long periods and at high
volume levels can lead to hearing damage!
9.4 Connecting a microphone
You can connect a microphone with a 3.5 mm stereo jack plug to the DVD
player. The microphone connection is located on the front panel of the DVD
player. When you have connected the microphone you can control the volume of
MIC VOL
the microphone via the
control on the front panel of the DVD player.
With the microphone you can, for example, use the karaoke function of
DVDs.
• Insert the microphones jack plug into the socket
socket on the front panel of the DVD player.
AUDIO IN
socket set the DVD
socket.
AUDIO IN
AUDIO IN
socket, the
PHONES
is located on the top panel of the
MIC
.
10. Operation
10.1 Switching the appliance on/off and sound source
selection
You switch the device on by selecting a sound source with the
switch:
•
DVD/USB/CARD
socket.
•
OFF
•
RADIO
1.
FUNCTION
Slide the
want.
2.
To switch the device off slide the
10.2 Adjusting the volume
You can adjust the sound volume with the volume regulator.
1.
To increase the sound level, turn the volume controller clockwise.
2.
To reduce the sound level, turn the volume controller counterclockwise.
10.3 Switch off sound
MUTE
1.
Press the
button to switch the sound off. The message MUTE appears
on the display.
2.
To switch the sound on again press the
Note:
During operation of the radio the sound can not be switched off with
MUTE
the
button.
10.4 Display functions
• You set the display up by flipping it open.
The display can be turned 270° by means of the swivel joint.
Switching the display on and off
1.
SCREEN ON
Hold the
2.
To switch the LCD display back on hold the
once more.
Display settings
1.
SCREEN ON
Press the
BRI (Brightness) and COL (Colour).
2.
With the control buttons
values.
3.
If you do not press any button for a period of 5 seconds the display
settings will again fade out.
- 8 -
switch to the position of the sound source that you
FUNCTION
switch to the OFF position.
MUTE
button once more.
button down briefly to switch off the LCD display.
SCREEN ON
button several times to alternate between the messages
you can set the brightness and colour
FUNCTION
button down briefly
Advertisement
Table of Contents
