Age Release Settings; Diverse Settings; Initial Operation Of The Dvd Player; Inserting The Dvd - Silvercrest KH 6779 Operating Instructions Manual

ProLogic:
Here you set the Dolby ProLogic compatibility.
:
No Dolby Prologic compatible audio component
AUS
is connected to the analogue stereo output (L/R).
:
AN A Dolby Prologic compatible audio component is
connected to the analogue stereo output (L/R) of
the DVD player.

10.5 Age release settings

In this menu you can administer the settings for child security and change the
password.
Note:
Only a few DVDs have a technical age restriction available. If there is no
technical age restriction on the DVD your DVD players child lock feature
can not be activated. The child lock can only function if it is activated on
the DVD player and a corresponding code is available on the inserted
DVD.
When you insert a DVD which, according to the child lock, may not be
played a window appears on the screen, in which you must enter your
password and confirm with OK.
Klasse:
Here you set the age release class in three levels.
:
G
:
PG-13
:
Erwachsene
In order to activate the age release class you must select from the OSD menu
Freigabe the item Klasse and enter the password (8888). Confirm your entry
OK
by pressing the button. Select the item Klasse again and now set the desired
child lock level. Confirm your entry by pressing the
Passwort
ändern:
Here you can change the preset password (8888) and
enter your own password. Only the numbers 0-9 can be
used.
• To change the password select from the OSD menu the item Passwort
ändern. Enter the valid password. Confirm your entry by pressing the
OK
button.
• Select the item Passwort ändern again and enter the new password.
Confirm your entry by pressing the
Note:
In the event that you forget your new password you can use the factory
preset password (8888).
Only DVDs without age restrictions
can be played back.
No DVDs with an age release from
13 years can be played back.
All DVDs, including those with age
restrictions over 18 can be played.
OK
button.
OK
button.

10.6 Diverse settings

In this menu you can reset the DVD player to the factory default settings and
set the playback priority of DVDs.
Standard-
einstellungen
laden:
Here you reset the DVD player's factory default settings.

11. Initial operation of the DVD player

After you have ...
• placed the DVD player in a suitable location
• connected the DVD player to a television by one of the designated
connection options
• connected the DVD player, if desired, to a HiFi or Surround system
(analogue/digital) for example a Dolby Digital or DTS receiver
• made the remote control ready for operation by inserting the batteries
• and know how to activate and operate the OSD menu with the remote
control
... the DVD player is ready for operation.

11.1 Inserting the DVD

To play a disc with the DVD player:
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
If no disc is inserted into the DVD player's disc tray:
keine Disc is displayed on the television screen.
• Open the disc tray by pressing the button
control or on the front panel of the DVD player. Öffnen is displayed on
the television screen.
• Insert the disc in the disc tray with the inscribed/labled side up.
For twin-sided discs: The side you would like to play must face down.
• After you have inserted the disc press the button
remote control or on the front panel of the DVD player again to close
the disc tray.
• The contents of the disc will now be loaded; this may take a few se-
conds. In the meantime Loading... is displayed on the television screen.
- 58 -
OPEN/CLOSE
on the remote
OPEN/CLOSE
on the