Updating
.........................................................................................................................................................
Depending upon the computer you use, there are two methods available to update your Parrot Zikmu Solo:
- Via Wi-Fi or Ethernet
- With a shared folder
Check the Parrot Zikmu Solo software version
There are three methods available to check the software version.
On your iPod, after connecting it to the Parrot Zikmu Solo, select
displayed information until "Zikmu-Solo" is displayed.
On the web interface, select the
On the Parrot Audio Suite application, select Settings. To ask your speaker to look for a new update each time you turn on
your Parrot Zikmu Solo, enable the
Check the Parrot Zikmu Solo latest software version available
There are three methods to check the software version available.
On the web interface, a pop-up window appears if a new update is available. You can also select the
and click on Update.
On the Parrot Audio Suite application, a pop-up window appears if a new update is available. You can also click on
Settings
and check
On the Parrot Zikmu Solo support page.
Updating the Parrot Zikmu Solo via Wi-Fi or Ethernet
Updating the Parrot Zikmu Solo using a shared folder
1. Download the software update file on the Parrot Zikmu Solo support page.
2. Create a folder on your computer and share this folder. To share a folder on a PC:
a. Right click the folder.
b. Click
Properties > Sharing > Advanced
c. Check the
Share this folder
26
Updating
General Settings
tab and click on Update.
Automatic update
Available
update.
Updating Parrot Zikmu Solo via Wi-Fi is carried out through the web interface.
Please refer to the
When you open the web interface, a pop-up window appears if a new update is
available. Click
the Parrot Zikmu Solo reboots automatically.
To ask your speaker to look for a new update each time you turn on your Parrot
Zikmu Solo, make sure the
sharing.
box then click on OK.
Settings (> General) >
option in the
General Settings
tab.
Using the web interface
section for more information.
Apply
then wait a few minutes. At the end of the update process,
Automatic
option is enabled in the
Information. Browse through the
General Settings
tab
General Settings
tab.