Using The Parrot Zikmu Solo With A Computer; Establishing A Connection With A Pc; Establishing A Connection With A Mac - Parrot ZIKMU SOLO User Manual

Using the Parrot Zikmu Solo with a computer

You can stream music via B luetooth to the Parrot Zikmu Solo from any PC supporting B luetooth technology and MAC OS X 10
(and later versions).
Note : If your PC is not Bluetooth enabled, use a Bluetooth dongle after having installed the necessary drivers.

Establishing a connection with a PC

The Parrot Zikmu Solo is compatible with all PCs supporting B luetooth technology.
1. Turn on the Parrot Zikmu Solo.
2. Remove the front grid.
3. Press the button
> The blue light next to this button blinks. The Parrot Zikmu Solo is now visible to other B luetooth devices for 2 minutes.
4. Click the B luetooth icon on the bottom right of your screen.
5. Click Add a peripheral
6. Select "Zikmu-SOLO" from the list and click
7. Click the B luetooth icon on the bottom right of your screen again.
8. Click Display Bluetooth
9. Double click the "Zikmu-SOLO" peripheral.
10. Click Connect.
11. Select Parrot Zikmu Solo as the external speaker for your computer. To do this:
a. Click the
b. Click Mixer.
c. Select Loudspeakers (Bluetooth Audio)
Note: To use your Parrot Zikmu Solo subsequently, your device just needs to be turned on, near your computer. You must also have
selected it as external speaker for the computer as shown in step 11. All devices paired with the computer remain in memory and
therefore do not require any additional action.

Establishing a connection with a Mac

You can use the Parrot Zikmu Solo with a Mac OS X Leopard (or later version).
1. Turn on the Parrot Zikmu Solo.
2. Remove the front grid.
3. Press the button
> The blue light next to this button blinks. The Parrot Zikmu Solo is now visible to other B luetooth devices for 2 minutes.
4. Click the B luetooth icon at the top right of your screen.
5. Ensure that the B luetooth function is enabled on your computer. If not, click on
6. Click Configure a Bluetooth
> The computer will look for available peripherals.
7. Select " Zikmu-Solo " from the list and click Continue.
> The window opposite is displayed.
8. Click Close to finalise the connection.
> Your computer and the Parrot Zikmu Solo are now connected and ready to be used.
9. Select your Parrot Zikmu Solo as the external speaker for your computer. To do this:
a. Click the B luetooth icon .
b. Select Zikmu Solo.
18
Bluetooth
of the Parrot Zikmu Solo.
.
Next
peripherals.
icon at the bottom right of your screen.
from the peripherals.
of the Parrot Zikmu Solo.
device.
.
Enable Bluetooth.