Using the equaliser
The equaliser lets you change the audio frequencies like you would on a Hi-Fi system. If you
disable this option, all the frequencies will be set to zero.
Adjust the low, middle or high frequencies as you want by using the cursors respectively
from left to right.
You can choose from 7 presets (e.g. Flat, Vocal, Pop...) to adapt the frequencies to the
style of music you listen to. If none of these suit your tastes, you can also create you own
presets during playback of a track. To do this, select the
Using the mixer
If you use Parrot Zikmu Solo with more than one source ( B luetooth , Wi-Fi, iPod or RCA), the
mixing table lets you avoid having too high a difference between volume levels to prevent
any unwanted surprises (volume too high following change of source).
NB: If you disable this option, the volume for all the sources will be set to zero.
Use the cursors on the mixing table to reach the desired volume levels.
Connecting to the Wi-Fi network
To connect to a Wi-Fi network:
1. Select the
Wi-Fi
2. Select the network from the list displayed or click
3. Enter the name of your network, select the type of security key (WEP or WPA/WPA2) and your password if necessary.
To connect in WPS mode
1. Check that WPS is enabled on your router (or box).
2. Select the
Wi-Fi
3. Click
Connect the Zikmu to the Wi-Fi
To restore the default Wi-Fi settings, click
Disable all sound effects
For demonstration purposes, you can disable all the improvements made by the Parrot Zikmu Solo to the sound quality of your
tracks. To do this, use the
We advise leaving this option set to ON. Only set this option to
Parrot technology.
Note: Disabling the option does not change the settings in the Audio Effects menu.
Select a source
To select a source:
1. Click on the
Player
2. Select a source from the list.
24
Settings
menu.
menu.
WPS.
Default
Audio Effects
option.
menu.
Custom
option.
Other
network.
settings.
OFF
to observe the sound processing power made possible by