Jack - Parrot ZIKMU SOLO User Manual

Jack

.........................................................................................................................................................
You can connect your analogue audio player (ex: CD player, TV) to the Parrot Zikmu Solo via a jack / jack cable to stream music.
To do so, connect the cable to the jack connector located under the speaker and start playing a track.
If you wish to connect the Parrot Zikmu Solo to an audio player with an optical audio output (TV or DVD player), use the
provided toslink / jack adapter.
The standard configuration of a SPDIF source may be configured to reproduce the original sound of the source.The Parrot
Zikmu Solo only supports PCM format. Compressed formats (dolby digital or DTS) are not supported. Refer to the
documentation of your source to configure the optical output to PCM only.
Note : Make sure that the connectors are inserted properly to avoid any disruption.
Note : To avoid any problem of sound saturation, increase the volume on the Parrot Zikmu Solo rather than on your audio player.
The audio mixer available on the Parrot Audio Suite application allows you to define a volume level by default for each source to
avoid problems such as a too high volume level after an audio source change.
20
Jack