Technical Information - Hans Grohe Pharo Skyline 26017XX1 Installation Instructions / Warranty

Technical Information

Recommended water pressure
Minimum water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Max. flow rate:
showerhead
handshower
neck spray
bodysprays
• Thermostatic temperature control
• The high temperature limit stop on the thermostatic
mixing valve may be reset to comply with local plumb-
ing codes -- please refer to the installation instruction
manual.
• Protection against back siphonage provided by check
valves. The check valves should be removed and
inspected yearly (see page 8).
• This panel may be used with an instantaneous water
heater if the heater is at least 24 kW and the output is
at least 3 gpm @ 30 psi pressure. However, only one
panel function may be used at a time.
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater. In Massachusetts, the water
heater may be set no higher than 112�F.
2
14.7 - 72.5 psi
29 psi
147 psi
120� - 140� F*
165�F*
2.5 gpm
2.5 gpm
2.5 gpm
0.72 gpm each
showerhead
neck spray
handshower
bodysprays
foot rest