Mitsubishi Electric M720 User Manual page 82

Table of Contents

Advertisement

Menu limit reached
Message not sent
Network busy
Network not allowed
New PIN2
incorrect. Try again
New PIN
incorrect. Try again
No response
Not allowed
Not allowed fixed dialling) A call is tried, but cancelled due to fixed dialling control (the number
Number changed
Page has no content
PIN blocked
PIN2 blocked
PUK2 blocked
Reaching allowed credit!
Registration required
Ring volume Off
Server limit reached
Service not available
SIM blocked. Contact
provider
SIM blocked. Enter PUK:
SIM fixed full
SIM names full
Phone names full
Wrong code. Try again
Wrong new code. Try again The new phone lock codes do not match (value control).
Wrong PIN, try again
Wrong PIN2, try again
Wrong PUK, try again
Wrong PUK2, try again
A new service menu item has been received but the remaining storage
space is not sufficient to store it. Delete one or more registered menu
items (My Services menu) and accept the new menu or discard the new
menu.
The handset may be out of the network range or the network is
temporarily overloaded.
You tried to make a call. The call is rejected by the network due to
congestion problems.
When selecting network manual search, you have selected a network
that rejects the connection.
Changing PIN2: the new PIN2 code values differ (value control).
Changing PIN: the new PIN code values differ (value control).
You made a call to a remote user and no response has been received.
Your number/character entry is not allowed.
dialled does not match with one of the fixed dialling numbers in
memory).
The called number has changed.
Your request was accepted by the network but the required server page
is empty.
A wrong PIN code has been entered 3 times.
A wrong PIN2 code has been entered 3 times.
A wrong PUK2 code has been entered 10 times.
The SIM services protected by the PIN2 code have now been
permanently disabled.
The cost limit is about to be reached. The connected call ends
automatically when the limit is reached.
You have not registered to any service. Go to the Service registration
menu.
The ring volume is set to 0 (no volume)
A new service has been received but the remaining storage space is not
sufficient to store it. Delete one or more registered service(s) - Settings
menu - and accept the new service or discard the new service.
Activating some GSM services that are not available on the network
A wrong PUK has been entered 10 times.
The SIM card has been permanently disabled and needs to be replaced
by a new one.
A wrong PIN code has been entered 3 times.
Enter the PUK code to unblock the SIM card.
The corresponding memory is full.
A wrong phone lock code has been entered.
The wrong code has been entered.
82-
Appendix

Advertisement

Table of Contents
loading

Table of Contents