Table of Contents
Advertisement
TO ENTER AND STORE THE PROFILE DETAILS
You can only register profile details if you have previously registered profiles in the Connection
manager menu (see "connection manager", page 71):
1
Press OK. Select Messages.
2
Select e-mail.
3
Select Settings.
4
Select Profiles.
5
Choose an empty profile ([...]) and select
6
Enter the profile name and press OK.
7
Select
Connection
GPRS connection fields are linked to the Connection manager and thus allow to pick one
from the displayed list - see page 71). Select
8
Select
Server
SMTP server and SMTP port number). Select
9
Select
Account
Save
Select
to store the data.
1.All the requested parameters can be obtained from your e-mail service provider.
2. The phone number or access point name, the login and the password have to be stored in the Connection
Manager (see Table , page 71).
3. A profile name cannot be stored twice. If an error message is displayed please also check the profile
names in the Connection profiles (see Table , page 71).
4. Access to the content of the e-mail profile may depend on the pre-programmed settings. The connection settings
menu may not be available in some cases. These settings may be 'Locked' (operator dependent) and not be user
programmable.
5. For more information on the Advanced settings please refer to "advanced settings on wap™ profiles", page 64.
MAXIMUM SIZE
This feature allows to choose the maximum size for the e-mails and attached files received in
the inbox. The maximum size can be modified (from 1kB to 1024kB).
To set a maximum size value:.
1
Press OK. Select Messages.
2
Select e-mail.
3
Select Settings.
4
Maximum
Select
5
Type in the maximum e-mail size you wish to retrieve from the server.
The e-mail size is checked before it is downloaded on to your mobile. If it exceeds the maximum size stored in
the 'Maximum size' field,the e-mail is not downloaded on to your mobile.
e-mail
SENDING AN
The Outbox folder contains the stored and sent e-mails (delivered or undelivered). These e-mails
can be selected from the Outbox menu and can be resent as new e-mails.
To select one of these e-mails:
1
Press OK. Select Messages.
2
Select e-mail.
3
Outbox
Select
4
Options
Press
e-mail address contained in the e-mail header) or Details.
You cannot modify the contents of an e-mail stored in the Outbox.
profiles. Enter the requested information (the GSM connection and
settings. Enter the requested information (POP3 server, POP3 port number,
Information. Enter your e-mail address, mailer login and mailer password.
size.
FROM THE OUTBOX
and use the up or down arrow key to scroll to the required message.
to View, Delete,
Delete
New
or press OK.
Save
to store the data.
Save
to store the data.
all, Send, Modify,
e-mail addresses
38-
E-mails
(to store the
Advertisement
Table of Contents
