Table of Contents
Advertisement
WAP™
Your mobile allows Wap™(Wireless Application Protocol) connections to
access operator and/or Wap™ provided services (e.g. news, sports, weather,
travel buying, etc.).
To get a Wap™ connection please make sure:
- your SIM card bears a Data subscription
- all the necessary parameters are stored into the mobile. These parameters
may have been set by your operator. If not you have to enter them manually.
Please contact your service provider to check these elements and get the detailed list of parameters
to be entered.
STORING THE CONNECTION SETTINGS
The current date and time must be set before you enter any Wap™ connection setting.
The profile list can contain up to 10 Wap™ profiles. A profile is a list of parameters that allow
Wap™ connections.
TO ENTER AND STORE THE PROFILE DETAILS
You can only register profile details via the standard mode if you have previously registered profiles
in the Connection manager menu (see "connection manager", page 71):
1
Press OK. Select Wap.
2
Select Settings.
3
Select
Wap
profiles.
4
Choose an empty profile ([...]) by selecting OK.
5
Enter the profile name and select OK.
6
Select
Home
page. Select
http:// and https:// root addresses, or type in the url address.
7
Connection
Select
GPRS connection fields are linked to the Connection manager and thus allow to pick one
from the displayed list - see "connection manager", page 71). Select
8
Gateway settings
Select
9
Push parameters
Select
entered). Your Wap profile is then stored.
1.All the requested parameters can be obtained from your network operator and/or Wap™ provider.
2. The phone number or access point name, the login and the password are to be stored in the Connection
Manager (see "connection manager", page 71).
3. Access to the connection settings may depend on the pre-programmed settings. The connection settings menu
may not be available in some cases. These settings may be 'Locked' and not be user programmable.
4. You can request the activation of the security feature from the profiles list (Advanced settings / Activate
security).
5. Your service provider may require to have the security context reset. Select Yes.
STARTING A WAP
If several Wap™ profiles are stored, you need to select one before launching a session:
1
Press OK. Select Wap.
2
Select Settings.
3
Wap
profiles.
Select
4
Scroll to the required profile and choose one by pressing
If the profile was already selected, pressing OK directly leads to the profile contents.
To launch a Wap™ session from the main menu:
1
Press OK. Select Wap.
List
to select one of the available home page addresses or the
profiles. Enter the requested information (the GSM connection and
and type in the IP address.
(please contact your service provider to get the information to be
™
SESSION
60-
OK (Selected
Wap
Save
to store the data.
is displayed).
Advertisement
Table of Contents
