Mitsubishi Electric M720 User Manual page 8

:
ENDING A CALL
1 Press on the On/Off key or by closing the clamshell.
Please see "active flip", page 70.
CLOSING THE CLAMSHELL
When closing the clamshell, the main screen is automatically switched off and the external
screen is automaticaly switched on. When the clamshell is closed and the mobile receives a
call, an incoming call animation and the caller's identity (network dependent feature) are dis-
played on the external screen.
HOLDING YOUR PHONE
How to hold
the phone.
Please be warned that you should not, when using the hands free mode, put the phone to your ear.
THE STANDBY DISPLAY
When switched on,the mobile searches for a connection with the network. When the
connection is established, a tone sounds and the network and/or service provider
name or logo are displayed together with the time and date, the signal strength and
the battery charge level. If the mobile cannot find a valid network the signal strength
and the operator name are not displayed.
The four arrows indicate features can be reached via the four arrows on the cursor key.
The oval symbol in the middle of the cursor key shows that the Menu can be reached
by pressing on the OK key (in the middle of the cursor key).
Wap and Message indicate you can directly access the IWap feature and the message services
by pressing on the softkeys.
shows your mobile is attached to a GPRS network.
THE EXTERNAL SCREEN
When switched on,the mobile searches for a connection with the network. When the
connection is established, a tone sounds and the network and/or service provider
name or logo are displayed together with the time, the signal strength and the bat-
tery charge level. If the mobile cannot find a valid network the signal strength and
the operator name are not displayed.
KEYPAD LOCK
When activated the keypad lock feature prevents accidental actions (e.g. camera activation) from
occurring while the phone is carried in a pocket or a bag. However,incoming calls can be received
and answered. When the call is ended,the keypad lock is automatically reactivated.
To activate the keypad lock from the standby display:
1 Press and hold
To activate the keypad lock from the main menu:
1
Press OK. Select
2 Select Keypad, then select
(
WHILE MAKING OR RECEIVING A CALL
. Keypad locked is displayed.
.
Settings
Keypad lock.
)
Avoid
covering the up-
per back half of
the phone so as to
allow maximum
emission and
reception quality.
Getting started
8-