Table of Contents
Advertisement
TG8051_8061E(e).book Page 28 Monday, January 24, 2011 4:37 PM
Programming
*12If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*13The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*14To prevent other users from joining your conversations with outside callers, turn this feature
on.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
L Set the date and time beforehand (page
16).
1
1 (middle soft key) (72)
2
{r}: Select the desired alarm option. s
M
"Off"
Turns alarm off. Go to step 6.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time. Go
to step 4.
3
Enter the desired date and month. s
M
4
Set the desired time. s M
5
{r}: Select the desired alarm tone. s
M
L We recommend selecting a different
ringer tone from the one used for
outside calls.
6
M s {ic}
L When the alarm is set, z is displayed.
Note:
L To stop the alarm, press {ic} or place
the handset on the base unit or charger.
L When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
28
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Using the phonebook's category feature (page
21), you can also select categories of callers
whose calls override night mode and ring the
handset (Caller ID subscribers only).
Important:
L Set the date and time beforehand (page
16).
L We recommend turning the base unit ringer
off (page 26) in addition to turning the night
mode on. (KX-TG8061/KX-TG8062/
KX-TG8063)
L If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
1 (middle soft key) (238
2
{r}: Select the desired setting. s M
L If you select "Off", press {ic} to
exit.
3
Enter the desired hour and minute you
wish to start this feature. s M
L You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing /.
4
Enter the desired hour and minute you
wish to end this feature. s M
5
{ic}
L When the night mode is set, f is
displayed.
Changing the start and end time
1
1 (middle soft key) (237
Hide quick links:
Advertisement
Table of Contents
