Note When Setting Up; Battery Charging - Panasonic KX-TG8051E Operating Instructions Manual

TG8051_8061E(e).book Page 12 Monday, January 24, 2011 4:37 PM
Getting Started
Battery installation
L USE ONLY Ni-MH batteries AAA (R03)
size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
L When the date and time setting is
displayed, see page 16.

Battery charging

Charge for about 7 hours.
L When the batteries are fully charged, the
charge indicator goes off and "Fully
charged" is displayed.
Confirm "Charging" is displayed.
Charge indicator
12
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333

Note when setting up

Note for connections
L The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor. Your Panasonic sales
shop can offer you more information about
connection possibilities.
Note for battery installation
L Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 8.
L Wipe the battery ends (S, T) with a dry
cloth.
L Avoid touching the battery ends (S, T) or
the unit contacts.
Note for battery charging
L It is normal for the handset to feel warm
during charging.
L Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Clean more often if the
unit is exposed to grease, dust, or high
humidity.