Listening To Messages Using The Handset - Panasonic KX-TG8051E Operating Instructions Manual

TG8051_8061E(e).book Page 36 Monday, January 24, 2011 4:37 PM
Answering System
Listening to messages
using the handset
When new messages have been recorded,
K is displayed on the handset with the total
number of new messages.
1
To listen to new messages:
1 (middle soft key) (323
To listen to all messages:
1 (middle soft key) (324
2
When finished, press {ic}.
Note:
L To switch to the receiver, press {C}.
Listening to messages from the
message list
You can select the item to play back.
1
1 (middle soft key) (329
2
{r}: Select the desired item from the
message list. s 0
L You can erase the selected message
as follows:
W s {r}: "Yes" s M
3
When finished, press {ic}.
Note:
L If the item has already been heard, "Q" is
displayed, even if it was heard using
another handset.
L "Message" is displayed in the message list
if the unit cannot receive caller information.
Operating the answering system
1 (middle soft key) s s s M
Key Operation
{^} or Adjust the receiver or
speaker volume (during
{V}
playback)
1 or {<} Repeat message (during
*1
playback)
2 or {>} Skip message (during
*2
playback)
36
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Key Operation
Enter the "Settings"
3
menu
Play new messages
4
Play all messages
5
Play greeting message
6
Record greeting message
76
Turn answering system on
8
Pause message
1
9 or Stop recording
Stop playback
O
Turn answering system off
)
*4
Erase currently playing
*4
message
Erase all messages
*5
Reset to a pre-recorded
*6
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is played
except when playing back from the
message list.
*2 When you play a message from the
message list, the unit stops message
playback and the display goes back to the
message list.
*3 To resume playback: {r}: "Play" s M
*4 You can also erase as follows:
W s {r}: "Yes" s M
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
1
Press 1 during playback.
2
{r}: "Call Back" s M
Editing the number before calling
back
1
Press 1 during playback.
2
{r}: "Edit & Call" s M
3
Edit the number. s {C}
*3