Panasonic KX-TG8051E Operating Instructions Manual page 27

TG8051_8061E(e).book Page 27 Monday, January 24, 2011 4:37 PM
Sub-menu 1 Sub-menu 2
*11
Keytones
*2
Call Restrict
*12
Auto Talk
Line Setup Recall/Flash
*2, *14
Privacy Mode
*2
Base Unit PIN
*2
Repeater Mode
Register Register H.set
(H.set: handset)
Cancel Register
Language Display
*1 KX-TG8061/KX-TG8062/KX-TG8063
*2 If you program these settings using one of the handsets, you do not need to program the same
item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual". (Caller
ID subscribers only)
To use this feature, set the date and time first (page 16).
*5 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*7 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*8 KX-TG8051
*9 You can set the wallpaper to display with or without date and time by pressing Z. The
default setting is with date and time displayed.
*10You can set the handset display backlight while on charge.
– "On": Backlight is on (dimmed).
– "Off": Backlight turns off after 10 seconds of charging.
*11Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Settings
– 1: <On> 0: Off
– –
– 1: On 0: <Off>
*2, *13
0: 900 msec.
1: 700 msec.
2: 600 msec.
3: 400 msec.
4: 300 msec.
5: 250 msec.
*: 200 msec.
#: 160 msec.
6: 110 msec.
7: <100 msec.>
8: 90 msec.
9: 80 msec.
– 1: On 0: <Off>
– <0000>
– 1: On 0: <Off>
–
*3
–
<English>
Programming
Code
+
#165 –
#256 30
#200 18
#121 19
#194 –
#132 30
#138 31
#130 30
#131 31
#110 16
27