Greeting Message; Listening To Messages Using The Base Unit - Panasonic KX-TG8051E Operating Instructions Manual

TG8051_8061E(e).book Page 35 Monday, January 24, 2011 4:37 PM

Greeting message

When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting
message
1
1 (middle soft key) (3)2
2
{r}: "Yes" s M
3
After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
4
Press O to stop recording.
5
{ic}
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a pre-
recorded greeting asking callers to leave a
message.
– If the message recording time (page 38) is
set to "Greeting Only", callers'
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
1 (middle soft key) (3)4
2
M s {ic}
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Answering System
Playing back the greeting
message
1
1 (middle soft key) (3)3
2
{ic}
Listening to messages
using the base unit
When new messages have been recorded,
{6} on the base unit flashes.
Press {6}.
L If new messages have been recorded, the
base unit plays back new messages.
L If there are no new messages, the base unit
plays back all messages.
Operating the answering system
during playback
Key Operation
{+} or {-} Adjust the speaker volume
Repeat message
{7}
Skip message
{8}
Stop playback
{■}
Erase currently playing
{4}
message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Erasing all messages
Press {4} 2 times while the unit is not in use.
*1
35