Panasonic Diga DMR-PWT500 Operating Instructions Manual page 83

IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
≥ "Connection Speed Setting" is enabled only when
"Connection Speed Auto-configure" is turned "Off".
Proxy Server Settings
Check and set the connection to the Proxy
server.
≥Press [OK] to show the respective setting.
Internet Content Settings
Network Settings
Internet Content Settings
Internet Content Settings
Lock
Automatic Volume Control
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (
Automatic Volume Control
Volume that is different depending on the
contents is adjusted automatically to the
standard volume while using the VIERA CAST.
≥Depending on contents, this function will not
work.
≥Select "Off" when the audio is warped.
Home Network ( DLNA ) Server Settings
You can set the DLNA (Server) function. (
Network Settings
Home Network ( DLNA ) Server Settings
74)
≥ The maximum number of equipment that can be
Home Network ( DLNA ) Server Settings
Home Network ( DLNA ) Server function
Setting device name
Registration type for remote devices
Remote device list
Home Network ( DLNA ) Server
function
You can switch between enable/disable of the
DLNA (Server) function.
≥If "On" is selected, "Power Save in Standby"
is fixed to "Off". ( 84)
≥This cannot be set to "On" if the connection
with the wireless broadband router is not
encrypted in the wireless connection.
Setting device name
It is also possible to change the name of this
unit on the network.
≥Select from a preset list
Select the preset name, then press [OK].
≥Create name
Enter the name. ( 73, Entering text)
Registration type for remote devices
Automatic All connected devices on the
same network can access this
unit.
Manual Only registered devices can
access this unit.
Remote device list
≥This function cannot be enabled when
"Automatic" is selected in "Registration type
for remote devices". (
≥To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
≥To deregister equipment
1 Select the registered equipment, then
press [OK].
2 Select "Yes", then press [OK].
registered is 16.
68)
above)
83
VQT3C81