Panasonic Diga DMR-PWT500 Operating Instructions Manual page 14

Settings
7
Set "Power Save" to "On", "On Timer"
or "Off", then press [OK].
Power Save in Standby
From
0
On It will go into the Power Save in
Standby mode.
On Set the start and stop time and then
Timer press [OK].
≥Power Save in Standby mode is
activated at the set time period.
Off It is possible to start quickly from the
standby mode. (Quick Start mode)
≥If you use Home Network ( DLNA )
Server function (
This function is not available with
other settings.
When the following screen appears, Easy Setting
is complete.
Easy Setting
Easy Setting has been completed.
To use Internet functions, network connection needs
to be made first. Proceed Network Easy Setting ?
Select "Yes" to start. Select "No" to exit the Setup.
Yes
OK
≥Select "Yes" to proceed to "Network Easy Setting".
( 15)
≥Select "No" to finish the Easy Setting.
14
VQT3C81
Power Save
On
To
6
83), select "Off".
No
To stop partway
Press [BACK/RETURN
To restart set up
1 Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Auto Setup" in "Tuning", then press [OK].
4 Select "Yes", then press [OK].
To display the Owner ID information on TV
1 While the unit is on, press and hold [OK], the
"Yellow" button and the "Blue" button on the
remote control at the same time for more than
5 seconds.
–"00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) on the remote control
or [Í/I] on the main unit until "01 OID" is displayed
on the unit's display.
3 Press [OK] on the remote control or [< OPEN/
CLOSE] on the main unit.
The PIN is not displayed.
To edit the Channel List (
To check the signal condition (
Condition)
To change PIN for parental control (
Entry)
To sort the Channel List by region (
Channel Sorting by Region)
].
75, Channel List)
76, Signal
85, PIN
75,