Safety Precautions; Features - Panasonic SL-PR300 Operating Instructions Manual

SL-PR300EB.fm Page 5 Thursday, September 20, 2001 3:42 PM

Safety Precautions

Placement
Set the unit up on an even surface away from direct sun-
light, high temperatures, high humidity, and excessive vibra-
tion. These conditions can damage the cabinet and other
components, thereby shortening the unit's service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can over-
load the unit and cause a fire.
Do not use a DC power source. Check the source care-
fully when setting the unit up on a ship or other place where
DC is used.
AC Mains Lead Protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire
or electric shock. Do not pull, bend, or place heavy items on
the lead.
Grasp the plug firmly when unplugging the lead. Pulling
the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
Foreign Matter
Do not let metal objects fall inside the unit. This can
cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They con-
tain flammable gases which can ignite if sprayed into the
unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any
other problem that is not covered in these operating instruc-
tions occurs, disconnect the AC mains lead and contact your
dealer or an authorized service center. Electric shock or
damage to the unit can occur if the unit is repaired, disas-
sembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the
power source if it is not to be used for a long time.

Features

The following is a list of some of the functions and conve-
niences obtained by having a 3-CD changer and CDR com-
bined in a single unit.
• Compatibility between 3-CD changer and CDR assured.
• High-speed recording from source discs in the 3-CD
changer to the target disc in the CDR unit (4x for CD-R, 2x
for CD-RW).
• Digital optical and coaxial I/O (input/output) terminals, and
analog I/O terminals are provided for external audio signal
source connections.
• Sampling frequency converter capable of converting digi-
tal signals with sampling frequency of 32 kHz and 48 kHz
to digital signals with a sampling frequency of 44.1 kHz for
quality recording from a variety of sources.
• No sampling frequency conversion of 44.1 kHz signals for
optimal recording of CDs.
• Mixing and recording of 3-CD changer playback and an
external source input.
• Many convenient recording options including: one-button
full CD and single track recording, Listening and Program
Edit recording, manual recording, synchronized start/stop
recording, and mixed input recording.
• CD playback pitch control that can adjust the speed of
play up to 12% faster or slower than the normal speed to
alter the pitch for singing along with songs or other cus-
tomized uses.
• Timer playback and timer recording that can be set for
one-time or everyday operation.
• OPC (Optimize Power Control), power adjustment per-
formed for best possible recording onto CD-R and CD-RW
media.
RQT6091