Specifications; Standard Accessory; All Reset - Panasonic WJ-MP204 Operating Instructions Manual

Data multiplex unit
Hide thumbs Also See for WJ-MP204:
Table of Contents

Advertisement

SPECIFICATIONS

Power Source
Power Consumption
Camera Input
Spot Input
VS/VD Input
Camera Output
Spot Output
VS/VD Output
Data Communication Standard
Alarm Input
Alarm Output
Alarm Recover Input
Alarm Reset Output
Spot Switching Input
Alarm Switching Output
Unit address
Operating for System
Ambient Operating Temperature
Ambient Operating Humidity
Dimensions
Weight
*1 Selectable using the mode switch
*2 Valid in communication mode
*3 Selectable using the Setup menu and internal connector
*4 Selectable using an internal switch
Dimensions and weight are approximate.
Specifications are subject to change without notice.

STANDARD ACCESSORY

Switch Protector ....................................................................... 1 pc.

ALL RESET

The Data Multiplex Unit WJ-MP204 can be reset to the default settings as follows:
1. Press the power switch to reset it to the OFF position.
2. Press the power switch down to the ON position while pressing the camera selection buttons 2, 3, and 4.
3. Continue to press the camera selection button approximately 3 seconds after press the power switch down to the ON.
4. When all indicators light up, resetting is completed.
29
: 220 - 240 V AC 50 Hz
: 7 W
: 1 V[p-p]/75
x 4
: 1 V[p-p]/75
x 1
: VS (1 V[p-p]/75 ), VD (4 V[p-p]/75 ) x1
: 1 V[p-p]/75
(Looped through) x4
: 1 V[p-p]/75
x1 (Changeable Output from camera input, or Spot input)
: VS/VD IN (Looped through), or internal VD (4 V[p-p]/75 ) x 1
: Based on RS485 (4-Line/2-Line*
Modular Jack x 1, or 5 pins terminal x 1*
: 4 (Alarm Output/Remote Input/Remote Output selectable)*
: 1 (O.C. [16 V, 100 mA])
: 1 (No Voltage Contact)
: 1 (0/5
O.C. [16 V, 100 mA])*
: 1 (No Voltage Contact)
: 1 (O.C. [16 V, 100 mA])
: 1 - 8 (Setting by Unit Switch) 9-99 (Setting by Setup menu)
: Selection Camera
Alarm (Data/Display/Reset/Suspend)
Setup
Camera, Lens, Housing, PAN/TILT, External device control
: –10°C - +50°C (14°F - 122°F )
: Less than 90 %
: 210 (W) x 44 (H) x 350 (D) mm
[8-9/16"(W) x1-3/4"(H) x13 3/4"(D)]
: 2.6 kg (5.72 lbs.)
1
2
3
Press
1
)
2
4
4
3

Advertisement

Table of Contents
loading

Table of Contents