Audio Dubbing - Panasonic V-GS150GC Operating Instructions Manual

≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the movie
camera, the picture is distorted by mosaic-like
patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
92
VQT0N45
Edit mode

Audio dubbing

You can add music or narration to the recorded
cassette.
≥Set to Tape Playback Mode.
1
Insert a free style remote control or an
external microphone securely into the
[REMOTE/MIC] terminal as far as it will go.
2
Find a scene that you want to add sound to,
and press the [;] button on the remote
control.
V
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
STOP
3
Press the [A.DUB] button on the remote
control to make audio dubbing ready.
¥
REC A.DUB
V
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
4
Press the [;] button on the remote control
to start audio dubbing.
V
/REW PLAY
STILL ADV PAUSE STILL ADV
STOP
≥When the free style remote control is used,
start recording with the [TALK] button
pressed.
≥Talk into the microphone.
5
Press the [;] button on the remote control
to stop audio dubbing.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
REMOTE/MIC
;
W
W
VOL
A.DUB ;
ZOOM
T
W
W
VOL
A.DUB ¥
W
FF/
W
VOL
V /REW PLAY FF/ W
W
VOL
STILL ADV PAUSE STILL ADV
STOP