Functions Cannot Be Used Simultaneously - Panasonic V-GS150GC Operating Instructions Manual

PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (
This may solve the problem.
CHANGE MODE TO USE USB:
The USB cable is connected to the movie
camera in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC mode with the USB cable connected to
the movie camera. You are attempting to
record pictures on a tape/card with the USB
cable connected to the movie camera.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB2.0.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux night view mode, when
LCD monitor is not reversed, it displays.
Others
Functions cannot be used
simultaneously
).
-55-
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions
≥Progressive
≥Digital zoom
≥Wide mode
≥Fade
≥Image stabilizer ≥When the Card Recording
≥Backlight
compensation
≥Soft skin
≥Tele-macro
≥Recording
check
≥Colour Night
View
≥Continuous
Photoshot
Conditions which disable
the functions
≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When brightness is
insufficient with the flash
[ ] in Tape Recording
Mode
≥When the colour night
view function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥When the wide mode is
used
≥When the Card Recording
mode is used
mode is used
≥When the colour night
view function is used
≥When the iris/gain is set
≥When the colour night
view function is used
≥While recording to a tape
≥While recording to a tape
≥When the Card Recording
mode is used
≥When [PICTURE SIZE] is
set to other than [640]
101
VQT0N45