Quick Start; Backlight Compensation Function - Panasonic V-GS150GC Operating Instructions Manual

Quick start

This camera will be put into standby in approx.
1.7 seconds after the power is turned on.
≥This is only activated in the following cases.
≥A tape or a card is inserted, while the Tape
Recording Mode is set.
≥A card is inserted, while the Card Recording
Mode is set.
1
Press the [QUICK START] button.
≥The quick start recording lamp lights up.
(Press the button again to cancel it.)
2
Set the [OFF/ON] switch to [OFF].
≥The quick start is now ready.
3
Set the [OFF/ON] switch to [ON].
≥This camera will be put into a recording
pause in approx. 1.7 seconds after it is turned
on.
ª
To cancel the quick start when the
power is [OFF]
Press and hold the [QUICK START] button for
approx. 2 seconds. The lamp will go off and the
camera will be completely turned off.
≥If the standby continues for approx. 30 minutes,
then the lamp will go off and the camera will be
completely turned off.
≥When you rotate the mode dial or remove the
battery, the quick start recording lamp is turned
off and the quick start mode is cancelled. If the
movie camera is turned on and the Tape/Card
Recording Mode is set though, the lamp turns
on and the quick start mode is restored.
≥When the camera is quick-started with the white
balance on automatic, it may take some time
until the white balance is adjusted if the scene
being recorded has a light source different from
the scene last recorded. (When the colour night
view function is used, however, the white
balance of the scene last recorded is retained.)
≥The zoom magnification may differ from when it
is in the quick start standby mode and when the
recording starts.
Record mode
≥Since about half the power of normal recording
is used in quick start standby, using quick start
reduces the recordable time.

Backlight compensation function

This protects a backlit subject from being
darkened.
≥Set to Tape/Card Recording Mode.
1
2
QUICK
START
ª
Select the [
≥If you operate the [OFF/ON] switch or the mode
POWER
dial, the backlight compensation is cancelled.
Press the joystick until the icon 1 appears.
Move the joystick right to select the
backlight compensation icon [
≥The image on the screen will become
brighter.
To return to normal recording
] icon again.
].
1
ª
75
VQT0N45