Table of Contents
Advertisement
Playing Back the Sound Recorded with
Audio Dubbing
♦ If you set [AUDIO REC] on the [MENU (OTHERS)l
Menu to [I2bit] for the original recording, the sound
added with audio dubbing and the original sound are
played back as follows depending on the setting of
[AUDIO OUT] on the VCR Mode Menu (-*
1
18 124V
or-t,
tl.
'
'
/•
ST1
ST2
MIX
The original sound alone is played back.
The dubbed sound alone is played back.
The original sound and the sound added with
audio dubbing are played back together.
♦ Do not perform audio dubbing onto unrecorded
parts of the tape. This could cause the playback
picture and sound to be distorted.
• If you reset the Tape Counter to zero at the point where
you want the audio dubbing to end and turn on the
memory Stop Function (-M54), the audio dubbing
automatically stops when the tape reaches that point.
♦
, $[MENU (OTHERS) ]2j?3S_t
[AUDIO OUT]<£j£tfefcB)$)S&£ •
(-*118-124):
STH
ST2: JtJffttttJtttS*:
MIX: jfc-i
Advertisement
Table of Contents
