Midas XL8 DL451 Operator's Manual page 34

16
5
At the "Clock Setup(out)" option, press SELECT.
6
Use the up/down arrow buttons to go to the desired
pair of output channels. For example, "Channels 7-8".
7
Press SELECT.
8
Use the down arrow button to go to the desired option.
For example, "48K".
9
Press SELECT.
10
Use the MENU button to exit.
>> To set up the SRC setting
1
In programming mode, select menu 5 (see "To select a
menu" on page 9).
2
Press MENU.
3
Use the down arrow button to go to the board you
want to set up. For example, board "C".
4
Press SELECT.
5
Use the down arrow button to go to the "SRC options"
option.
6
Press SELECT.
Chapter 5: Programming Mode
DL451 Modular I/O
Operator Manual