Table of Contents
Advertisement
Menus
1 MicSplit ID menu
This menu lets you set up the network ID of the DL431 Mic Splitter. There are eight ID
numbers available.
>> To set up the unit's ID
1
In programming mode, select menu 1 (see "To select a
menu" on page 13).
2
Use the up/down arrow buttons to choose the ID
number you want, for example, mic splitter ID 2.
3
Press SELECT.
4
To exit programming mode, press MENU. The default
display will now show the newly configured ID.
2 AES50 Sync menu
This menu lets you set up the clock source for AES50 synchronisation of the DL431 Mic
Splitter, and has the following options:
• Cable Sync A — if using the FOH console's clock as the AES50 master.
• Cable Sync B — if using the MON console's clock as the AES50 master.
• Internal Sync — for stand alone operation and test purposes.
>> To set up the unit's AES50 synchronisation
1
In programming mode, select menu 2 (see "To select a
menu" on page 13).
2
Use the up/down arrow buttons to choose the source
of AES50 synchronisation for the unit, for example,
internal synchronisation.
DL431 Mic Splitter
Operator Manual
17
Advertisement
Table of Contents
