Hardware Installation (Wall Mount) - Nexcom NCm-301-V User Manual

3megapixel/1080p full hd resolution

Hide thumbs Also See for NCm-301-V:

Table of Contents

Chapter 1: Product Introduction

Hardware Installation (Wall Mount)

1. Position the placement sticker at the desired installation location.

2. Drill four mounting holes, and insert the included screw anchors.

3. Attach the silicon base pad to the bottom of the camera (this step may

be omitted if the network cable runs behind the wall).

4. Separate the top cover. Mount the camera using the supplied hardware.

Run the network cable through the C-shaped base, and adjust the lens

to the appropriate position (Figure 3).

5. Put dehumidifier packet in system.

6. Replace the top cover and secure it tightly using the supplied tool.

NCm-301-V/NCm-301-VM/NCm-301-2V/NCm-301-2VM User Manual

Table of Contents

Ncm-301-vm Ncm-301-2v Ncm-301-2vm