Hardware Installation - Nexcom NCi-312 User Manual

Chapter 1: Product Introduction

Hardware Installation

Step 1. Step 2.
Step 3.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
1. Position the placement sticker at the desired installation location on the
wall/ceiling. Then use a driller to drill the mountings holes on the sticker.
2. Adjust the camera angle to the desired field of view, then push down
the two spring plates on the sides of the camera and slide it through the
hole.
3. Replace the top cover to complete the installation.
4
NCi-312 User Manual