Table of Contents
Advertisement
Chapter 2: Camera Configuration
SMTP
This section configures the SMTP mail server address that the camera will
use for sending emails.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
SMTP Server
Mail Server
Specify the host name or IP address of the SMTP mail server.
Port Number
Specify the port number of the SMTP mail server.
Login Information
Username
Specify the login username for the SMTP mail server.
Password
Specify the login password for the SMTP mail server.
Email Address From
Specify the email address of the sender.
To Mail Address
Mail Address
Specify the email address to send the email when an event is triggered by
motion detection.
Mail Test Status
Displays the status of the test connection.
Mail Test
Tests the network connection between the camera and mail address.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
23
NCm-301-V/NCm-301-VM/NCm-301-2V/NCm-301-2VM User Manual
Advertisement
Table of Contents
