Detection Zones - Nexcom NCm-301-V User Manual

3megapixel/1080p full hd resolution

Hide thumbs Also See for NCm-301-V:

Table of Contents

Chapter 2: Camera Configuration

Detection Zones

This section shows the live video from the camera, the screen is divided

into 5x5 rectangular boxes, to setup motion detection, please follow the

instructions below.

1. Check the Enable motion detection option, and specify the sensitivity

level.

2. In the live video screen below, select the desired area for motion

detection by clicking on the rectangular box. The border of the box will

turn red indicating that it is selected. You can select multiple boxes, up

to 5x5 boxes can be selected.

3. Press the Save button once all the desired areas are selected for the

changes to take effect.

Highlighted

box

To remove motion detection from an area, click the box to deselect it, then

press the Save button for the changes to take effect.

NCm-301-V/NCm-301-VM/NCm-301-2V/NCm-301-2VM User Manual

Area with

motion detect

enabled

Table of Contents

Ncm-301-vm Ncm-301-2v Ncm-301-2vm