Operation Mode - Panasonic CZ-01ESM11P Operation Manual

OPERATION MODE

The following five operation control modes can be selected along with the temperature setting and operation mode
by remote controller, for a total of twenty different modes. These twenty modes are set and displayed with control
modes of 0 to 19. (For further details, see EXAMPLE OF OPERATION SCHEDULE on the next page.)
● ON/OFF control impossible by remote controller .......... Use this mode when operating and stopping from the
● Only OFF control possible by remote controller ............ Use this mode when executing the operation only by
● Centralized ........................................................................ Use this mode when executing the operation only by
● Individual ........................................................................... Use this mode when executing operation/stop both
● Timer operation possible by remote controller ............... Use this mode when executing operation/stop by
HOW TO SELECT THE CONTROL MODE
● Select whether to accept or to reject the operation from the remote controller regarding the operation, stop,
temperature setting and operation mode setting, respectively, and determine the particular control mode from the
rightmost column of the table below.
Example
Operation by remote
controller (at time of
unified operation by
centralized control)
M
[Rejection]
Operation mode
ON/OFF control impossible
by remote controller
Only OFF control possible
by remote controller
Operation by remote
controller (at time of
unified operation by
centralized control)
M
[Rejection]
Operation
Unified operation, individual Unified stop, indivi-
operation by central remote dual stop by central
controller, or operation remote controller, or
controlled by timer timer stop
Rejection
(Example)
central remote controller only. (ON/OFF control by
the remote controller is disabled.)
the central remote controller, and executing only the
stop by remote controller.
the central remote controller, and executing opera-
tion/stop freely by remote controller during the preset
hours.
by central remote controller and remote controller.
remote controller during the preset hours, and not
starting operation by the central remote controller at
the programmed time of system start.
Temperature Operation
Stop by
control by mode setting
remote
remote by remote
controller
controller controller
M M
[Rejection] [Acceptance] [Acceptance]
Control by remote controller
Stop
Rejection
(Example)
Rejection
(Example)
Acceptance
The control
M
mode is "1".
Operation Control
Tempera-
mode mode
ture control
setting
Acceptance
Rejection
Rejection
Acceptance
1 (Example)
Acceptance (Example)
(Example)
Rejection
Acceptance
Rejection
Rejection
Acceptance
Acceptance
Rejection
0
10
11
2
12
3
13
24