Panasonic CZ-01ESM11P Operation Manual page 15

UNIFIED OPERATION
(Fig. 12)
Use this function when executing operation and stop
of all the connected indoor units.
A
Unified operation
Press the UNIFIED OPERATION
BUTTON. All the displays "
the group No. in operation light up
at the same time, and all the groups
start to operate at the same time.
MONITOR
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
1
2
3
4
B
Unified stop
Press the UNIFIED STOP BUTTON.
The lights of every display "
group No. in operation go out at the
same time; then, the lights of all the
groups stop at the same time.
MONITOR
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
1
2
3
4
● When using the central remote controller in conjunc-
tion with other optional controllers for centralized
control, the OPERATION LAMP on controllers which
are not being used for operation may delay a few
minutes before lighting or going out.
There is nothing wrong with the equipment. The
delay is due to signal exchange.
31
" of
GROUP
" of
GROUP