Konica Minolta BIZHUB 350 User Manual page 426

Specifying management settings
Specifying the setting
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5
4, 3, 2, 1, 0
Reminder
Do not specify settings for mode 479 other than those described in
"Specifying the setting".
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select "Exter-
nal Server" as the user authentication method. For details on the external
server authentication settings, refer to the User's Guide [Copy Opera-
tions].
200/250/350
Description Setting
---------------------- 000
Specifies whether or 11001
not to limit authenti-
00000
cation on Fax and
Scan functions.
Description
*Do not change these
bits.
Limited
Not limited
9
Page refer-
ence
----------
----------
9-57