Konica Minolta BIZHUB 350 User Manual page 424

Specifying management settings
Bit
5
4, 3, 2, 1, 0
*1 If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the re-
cipient, bit 6 must also be set to "1" (settings can only be specified in Admin-
istrator mode).
*2 If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
200/250/350
Description Setting
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched. 1, 2
----------------------- 00000
Description
Displayed
Not displayed
*Do not change these
bits.
9
Page refer-
ence
----------
----------
9-55